Drolet Eco-55 Pellet Stove

Drolet Eco-55 Pellet Stove

Easy to use and maintain, the Eco-55 pellet stove is ideal for heating spaces up to 2,000 ft². It features intuitive electronic control and easy to use thermostatic control. Cleaning is a breeze, with access to components that are removable without tools. Certified at only 0.96 g/h, the Eco-55 produces up to 39,260 BTU/h, and provides clean and efficient heating.


Included: blower, ceramic glass, ash lip

  • - Burn time up to 51 hours (up to 120 hours with the optional hopper extension)
  • - Hopper capacity of 60 lb
  • - Top-feed burner
  • - EPA 2020 certified
  • - Proudly made in Canada
  • - Limited lifetime warranty
  • - Certified for mobile home and alcove installation
  • - Weight : 279 lbs

Options: wall thermostat, fresh air intake kit, hopper extension, stand alone auxiliary discharge tank, storage tank with pneumatic self-feeding pellet system, storage tank extension 

Features & Specs


Fuel type (12) Pellet (Premium grade or better)
Recommended heating area (10) 500 - 2,000 ft²
Hopper capacity 60 lb (27 kg)
Maximum burn time (10) 51 h
Maximum heat input rate (4) 39,260 BTU/h (11.5 kW)
Minimum overall heat output rate (5) 6,648 BTU/h (1.95 kW)
Maximum overall heat output rate (5) 28,540 BTU/h (8.36 kW)
Minimum average overall efficiency (HHV) (6) (8) 70.3 %
Maximum average overall efficiency (LHV) (6) (7) 75.8 %
Optimum efficiency (2) 78.4%
Optimum heat transfer efficiency (9) 73 %
Burn rate 1.2 - 4.7 lb/h
Average particulate emission rate (3) 0.96 g/h
Average CO (11) 7.6 g/h
Average electrical power consumption for ignition cycle (1) 3.02A (360 W)
Average electrical power consumption for continuous operation (1) 1.3 - 2.5A (51 - 140 W)
Size Medium
Alcove installation approved Yes
Mobile home approved Yes, with fresh air intake
High-efficiency certified appliance Yes, EPA 2020 approved
Combustion technology Top-feed
Baffle type Stainless steel
Flue outlet diameter 3"
Chimney diameter 3" | 4"
Type of chimney ULC/ORD-C441, CAN/ULC S609, UL 641 (TYPE L)
Overall dimension (Width) 25 1/4"
Overall dimension (Height) 32 5/8"
Overall dimension (Depth) 29 1/2"
Premium quality blower included (CFM) 176 CFM included
Voltage and frequency 120 VAC / 60 Hz
Noise level at 6 feet 47 dBa (+/- 3 dBa) - 60 dBa (+/- 3 dBa)
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Glass surface - W x H 15 3/4" x 8 1/8"
Canadian Standard (emissions) CSA B415.1-10
USA Standard (emissions) EPA, ASTM E2779
Canadian Standard (safety) ULC S627
USA Standard (safety) UL 1482, ASTM E1509
Certified according to applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime
Shipping weight 277 lb (126 kg)

Clearance to Combustibles

Applies to 84" ceiling installation only.

See Manual in "Guides" Tab above for other installation requirements.

Canada United States
Clearance - Back wall 3" 3"
Clearance - Side wall 6" 6"
Clearance - Corner 3" 3"
Clearance - Base of the unit to ceiling** 48" 48"


*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

1. Unless stated otherwise, measures were taken directly at the main power source and include all electrical components present in the appliance.
2. Optimum overall efficiency at a specific burn rate (LHV).
3. This appliance is officially tested and certified by an independent agency.
4. Based on the maximum burn-rate and a dry energy value of pellet at 8,600 BTU/lb.
5. As measured per CSA B415.1-10 stack loss method.
6. Efficiency based on radiated and delivered heat when allowing cycling from high to low burn to simulate thermostat demand.
7. Lower Heating Value of the fuel.
8. Higher Heating Value of the fuel.
9. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
10. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type, feed rate, fuel level, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature considering that the space configuration and the presence of heat distribution systems have a significant impact in making heat circulation optimum.
11. Carbon monoxyde.
12. Grades of pellet fuel are determined by organizations such as Pellet Fuels Institute (PFI), ENplus and CANplus.



Installation Manual

Operation Manual