Sale

Drolet Escape 1800 Wood Stove - Black Door


Drolet Escape 1800 Wood Stove - Black Door

Ideal for spaces up to 2,100 ft², this large non-catalytic wood stove produces up to 75,000 BTU/h and emits only 1.54 g/h of fine particles. The unit is equipped with side panels that reduce clearances to combustible materials, and a top heat exchanger that redirects heat to the front of the unit.

ESCAPE 1800 WOOD STOVE - BLACK DOOR

Included: pedestal with ash drawer, top air deflector, ceramic glass, side panels, ash lip, air damper

  • - Up to 8 hours burn time
  • - Up to 20'' logs
  • - 2.4 ft³ firebox
  • - Heavy duty 5/16'' steel top
  • - EPA certified
  • - Proudly made in Canada
  • - Limited lifetime warranty
  • - Certified for mobile home and alcove installation
  • - Weight : 382 lbs

Options: blower, thermodisc, firescreen, fresh air intake kit

Features & Specs

Specifications:

Canada United States
Single wall pipe Double wall pipe Single wall pipe
Double wall pipe
Clearance - Back wall 14 1/2" 6" 11" 6"
Clearance - Side wall 17" 17" 16" 16"
Clearance - Corner 10" 7" 10" 7"
Clearance - Base of the unit to ceiling** 84" 84" 84" 84"


Clearance to Combustibles

Applies to 84" ceiling installation only.

See Manual in "Guides" Tab above for other installation requirements.

Canada United States
Single wall pipe Double wall pipe Single wall pipe
Double wall pipe
Clearance - Back wall 14" 6" 12" 6"
Clearance - Side wall 18" 18" 18" 18"
Clearance - Corner 11" 7" 11" 7"
Clearance - Base of the unit to ceiling** 84" 84" 84" 84"

 

*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

1. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
2. Optimum overall efficiency at a specific burn rate (LHV).
3. This appliance is officially tested and certified by an independent agency.
4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
5. As measured per CSA B415.1-10 stack loss method.
6. Higher Heating Value of the fuel.
7. Lower Heating Value of the fuel.
8. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
9. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
10. Carbon monoxyde.

Guides

Dimensions


Safety Manual


Installation Manual